casino siteleri
Computers and Technology

a freestyle beginner FPV drone setup

Probably you are a pilot that is starting to the hobby and want to build his first FPV drone but you don’t know which components to buy, here you have a list of the best components for beginners.

This is a freestyle beginner fpv setup that allows you to do any tricks.

Here is the components list and why you have to choose it and not others:

-Frame: Realacc martian 220mm

The frame had to meet four fundamental requirements, center of gravity centered on the 3 axes, true-X geometry, integrated anti-shake system and a clean vision with a full-size fpv camera.

In order for the center of gravity to be centered on the three axes, it was necessary to use spacers of a maximum of 25mm, this manages to center the center of gravity on the propellers.

This frame meet the requierement of be cheap and easy to repare if you broke any arm.

-Flight controller: HGLRC DJI Zeus F722 3-6S F7

The Zeus F722 FC supports Betaflight, Emuflight, and iNav firmwares.

This flight controller includes some Plug & Play ports for DJI Air Unit, GPS and LEDs!

Also include a good surface for have crossfire and tbs pro 32 nano

-ESC: HGLRC Forward 60A 3-6S BLHeli 32 4in1 ESC for FPV Racing Drone

This excellent quality esc includes the Brand New STM32F051 32-bit MCU, that supports up to 48MHZ running frequency.

This esc brings an Immersion gold design with a heat and a current resistance, it has a CNC heat sink that offers a high thermal conductivity.

This esc is the best that I have ever tested, and it’s so difficult to break, it’s a good option for a beginner because it gives you a lot of possibilities.

-Fpv camera: RunCam Phoenix 2

This RunCam camera includes some upgrades like the camera MCU and now added a bigger 1/2” image sensor .

Phoenix 2 has a  low light performance and is even better than the RunCam Eagle. The newest 6 layers M12 glass lens has a ƒ/2.0 aperture which gives you a less red lens flare and a less purple fringing effect, this camera is easy to configure and it provides you a great vision that beginners need.

-Motors: Hobbywing xrotor 2207 1750kv

The Hobbywing Xrotor 2207 Race Motor has been designed for the top competitive pilots of the FPV drone racing scene, this motor can be choosen for a beginner fpv setup thanks to the long flight time and low amperes draw that this motors have. Also these motors have been made to provide extreme power pull, with a rapid response to the throttle commands.

Some of the characteristics off this motors are:

● Includes a High quality 7075 aluminum, and a high-precision CNC Machining technology that produces a highest strength and axial concentricity.

● The hollow Titanium shaft reduces the shafts overall weight by a 50%.

● The EZO bearings are high-quality bearings, the best available, providing longer life and lower noise.

This motor without dude is perfect for any build but i think that it’s perfect for a beginner fpv setup.

-Video transmitter: Tbs unify pro v3

This vtx is the tbs unify pro v3, this is smallest and most powerful with a top output power of 800mw, that video transmitter is one of the best that the world has ever seen! It’s race ready with an included PitMode, a super-clean and interference free power levels, and connectivity to flight controllers and other means of quickly changing channels for situations that you can’t use the button. It runs off with a filtered 5V power supply, so it’s perfect when it’s connected to a TBS CORE PRO or to the TBS PowerCube.

This old vtx will be the best vtx for beginners and freestyle pilots, this vtx gives you a huge range of video.

e-Props: Dalprop nepal n1

The dalprop nepal n1 props is the best freestyle prop that is now on the market, this freestyle prop has the best design for the moment, with this design the prop allows you to have less electrical noise, less propwash and this without loosing control and pull power.

In a long time it’s going to be the best prop for a fpv freestyle setup.

-Video antenna: Foxeer lollipop v3


After testing a lot of differents video antennas i can check that the foxeer lollipop v3 is one of the best antennas and cheap antenna that you can use for your beginner fpv setup, this antenna gives you a good quality image video in a long distance or a good image between walls.

Without dude you can think to buy this antenna.

For me this is the best beginner FPV drone setup you can buy and it could be also your expert setup when you start to control perfect all the movements.
For more informative articles keep visiting Emu Article.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button